Material number   (translated from German)
... warm-pressed Chemical composition Number Meaning 0 Sintered iron, Sintered steel, unalloyed (0... 1 %) 1 Sintered steel, 1...5 % Cu , with or without C 2 Sintered steel; > 5 % cu; with or without C 3 Sintered steel; with or without C and/ ...
http://de.wikipedia.org/wiki/Werkstoffnummer - 16k - Cached (German) - Wikipedia (German) - Similar pages

Sintering   (translated from French)
... as cores of the induction coils are sintered under very strong pressure, like the metal ... detinées with the cut of metals are sintered with a metal binder which increases solidity ... bearings impregnated, ISO 5755/2: iron and sintered steel containing of carbon and/or copper ... or international standards relate to infiltrated steels, sintered bronzes and brasses, etc. Note Not to ...
http://fr.wikipedia.org/wiki/Frittage - 19k - Cached (French) - Wikipedia (French) - Similar pages

Board construction
... are slower sliding than other base types. Sintered: P-Tex base material is ground to ... and heat, and cut to shape. A sintered base is very porous and absorbs wax well. Sintered bases slide faster than extruded bases, but ... more expensive, and harder to repair. Graphite: Sintered bases may have graphite added to the ...
http://en.wikipedia.org/wiki/Board_construction - 7k - Cached - Similar pages

Transparent alumina
... the Fraunhofer Institute for Ceramic Technologies and Sintered Materials. This sintered alumina is very hard, nearly transparent, and ... melting point (2303 kelvins), yet like other sintered materials it can be produced at temperatures ... the Fraunhofer-Institute for Ceramic Technologies and Sintered Materials) Transparent sinter alumina (press release) Rosenflanz ...
http://en.wikipedia.org/wiki/Transparent_alumina - 3k - Cached - Similar pages

Nickel-cadmium battery
... Around the middle of the twentieth century, sintered plate nickel-cadmium batteries became increasingly popular. Sintered plates are created by fusing nickel powder ... in nickel and cadmium active materials, respectively. Sintered plates are usually much thinner than the ... G. B., Mandel, H., and Linden, D. "Sintered Plate Nickel-Cadmium Batteries". Journal of the ...
http://en.wikipedia.org/wiki/Nickel-cadmium_battery - 26k - Cached - Similar pages

Aluminum nitride   (translated from German)
... at temperatures of approx.. 1800°C pressure-free sintered. With the help of suitable sinter additives ... aluminum nitride into Aluminium hydroxide and Ammoniak . Sintered ceramic(s) does not exhibit hydrolysis sensitivity ... In Natronlauge both aluminum nitride powder and sintered AlN ceramic(s) in ammonia decompose and ...
http://de.wikipedia.org/wiki/Aluminiumnitrid - 6k - Cached (German) - Wikipedia (German) - Similar pages

Tantalum electrolytic capacitor   (translated from German)
... this condenser tantalum powder is pressed and sintered under vacuum at high temperature. The porous ... cm 2 per cm 3 Volume. The sintered compact is now formed - the tantalum surface ... 5 ) the dielectric forms. Now the formed sintered compact becomes into one Manganverbindung getaucht und ...
http://de.wikipedia.org/wiki/Tantal-Elektrolytkondensator - 5k - Cached (German) - Wikipedia (German) - Similar pages

Ferrite   (translated from German)
... to Presslingen to be formed and afterwards sintered. Directly from the output materials formed presskoerper can be concentrated calcined and sintered, the magnetic characteristic values of in this ... very bad. Soft-magnetic ferrites are before-sintered likewise (bildungsreaktion), up husbands and pressed. However ...
http://de.wikipedia.org/wiki/Ferrit - 9k - Cached (German) - Wikipedia (German) - Similar pages

Terminal ballistics
... quickly. Similar bullets are made out of sintered metals, which turn to powder upon impact ... are used. One interesting use of the sintered metal rounds is in shotguns in hostage rescue situations; the sintered metal round is used at near-contact ...
http://en.wikipedia.org/wiki/Terminal_ballistics - 54k - Cached - Similar pages

Cutting tool material   (translated from Japanese)
... material Basic material diamond Natural diamond Diamond sintered body (polycrystal diamonds, PCD) cubic boron nitride (Cubic Boron Nitride CBN and CBN sintered body) Ceramics Alumina (Alumina Alumina Al 2 ...
http://ja.wikipedia.org/wiki/切削工具材質 - 1k - Cached (Japanese) - Wikipedia (Japanese) - Similar pages